|
Welding
Technology
Industrial
Technology Division
WELD-06 FUNDAMENTALS OF OXY-FUEL WELDING AND SHIELDED METAL ARC WELDING (Also: MECH-06)
3 units: 2 hour lecture, 3 hours lab.
Advisories: ENGL-81, ENGL-84; MATH-80 or MATH-83.
This course emphasizes the development of minimum skill standards in welding. The SMAW (shielded metal arc welding), OFW (oxyfuel welding) and OFC (oxyfuel cutting) processes are covered as prescribed in the AWS QC 10 specifications. The qualification and certification standards for entry-level welders as established by the American Welding Society will be covered. (2/00)
WELD-07 FUNDAMENTALS OF T.I.G. AND M.I.G. WELDING
(Also: MECH-07)
3 units: 2 hour lecture, 3 hours lab.
Advisories: ENGL-81, ENGL-84; MATH-80 or MATH-83.
This course emphasizes the development of minimum skill standards in welding. The gaseous metal arc welding (GMAW), gaseous tungsten arc welding (GTAW), and (PAC) plasma arc cutting processes are studied as prescribed in the (AWS.) American Welding Society Training Qualification (QC 10) entry-level standards. (2/00)
WELD-40A WELDING DESIGN AND CONSTRUCTION
(Also: MECH-19A)
3 units: 2 hours lecture, 3 hours lab.
Advisories: ENGL-81,ENGL-84; MATH-80 or MATH-83; WELD-07.
This course covers design and construction of special industrial and agricultural equipment. (2/00)
WELD-40B WELDING DESIGN AND CONSTRUCTION
(Also: MECH-19B)
3 units: 2 hours lecture, 3 hours lab.
Prerequisite: WELD-40A/MECH-19A.
Advisories: ENGL-81, ENGL-84; MATH-80 or MATH-83.
This course is a continuation of WELD-40A and stresses design and construction of special agricultural and industrial equipment. (2/00)
WELD-45 ADVANCED ARC WELDING PROCEDURES
(Also: MECH-45)
3 units: 2 hours lecture, 3 hours lab.
Advisories: ENGL-B; MATH-80 or MATH-83; WELD/MECH-06 or WELD/MECH-07.
This course is designed to emphasize advanced skills and techniques of Shielded Metal Arc Welding, Gas Metal Arc Welding, Gas Tungsten Arc Welding, Air Carbon Arc Cutting, and Oxyacetylene Flame Cutting as related to pipe and structural members. An AWS Certification Test will be administered at the end of this course. (2/04)
WELD-48 SPECIAL PROBLEMS IN WELDING TECHNOLOGY
2 units: 6 hours lab.
Prerequisites: WELD-06, WELD-07.
Advisories: ENGL-81, ENGL-84: MATH-80 or MATH-83.
This course prepares the student for employment in the welding trades with entry-level skills. Trade techniques and information needed for employment in trade occupations will receive special attention. (2/00)
|
